Suzhou Jidong New Material Technology Co., Ltd
Service Hotline:
0086 139 229 345 98
E-mail:13922934598@139.com
Online customer service
 Work Time
Mon to Fri :8:00-20:00
Sat to Sun :9:00-17:00
 Contact Details
手机:0086 139 229 345 98
邮箱:409639645@qq.com

What aspects need to be noted for the surface protection of hot-pressed molding of plastic products

  43
Author:Jidong New Materials

During the hot-press molding process of plastic products, the surface protective film needs to meet the following key requirements to ensure the surface quality and process stability of the products:

装饰件6_副本.png

1. High temperature resistance

- Thermal stability: The protective film needs to withstand the high temperature during hot-press molding (usually 80~200°C), avoiding melting, decomposition or adhesion.

- Low thermal shrinkage rate: Good dimensional stability at high temperatures to prevent protection failure or deformation due to shrinkage.


2. Bonding performance

- Moderate viscosity: The adhesive needs to maintain adhesion under high temperature and high pressure, but it is easy to peel off after cooling without leaving residue.

- Targeted adaptation: Select the viscosity level (low, medium, high viscosity) according to the surface characteristics of the material (such as smooth, rough, polar).


3. Mechanical strength

- Tensile and puncture resistance: Can withstand the mechanical stress during hot-pressing and avoid cracking (especially for sharp or complex structural components).

- Flexibility: Does not warp when fitting complex curved surfaces.


4. Chemical inertness

- No pollution reaction: Does not have a chemical reaction with the plastic material or the mold and does not release volatile substances (such as silicone oil).

- Chemical corrosion resistance: Resistance to possible contact with mold release agents or process auxiliaries.


5. Thickness and uniformity

- Uniform thickness (within ±5%): Ensure uniform pressure transmission to avoid local stress causing defects.

- Ultra-thin design (optional): Reduce the influence on the molding accuracy (such as microstructured surfaces).


6. **Functional requirements

- Transmittance: When optical detection is required, select a film with a high transmittance (such as a PET substrate).

- Antistatic: Prevent dust adsorption (critical for electronic precision components).

- Environmental friendliness: Comply with regulations such as RoHS, and recyclable materials are preferred.


7. Process compatibility

- Quick application and peeling: Adapt to the production line rhythm and improve efficiency (such as self-adhesive or pre-cut films).

- Resistance to multiple pressings: For products that require multi-process molding, the protective film needs to support repeated processing.


Selection suggestions

- High-temperature scenarios (such as PC/PMMA): Select polyimide (PI) or high-temperature-resistant PET films.

- High tensile demand: PE substrate or composite films (such as PE + PP).

- Precision electronic components: Antistatic PET films combined with silicone-based adhesives.

- Environmental requirements: Bio-based PE or degradable PLA films (temperature resistance needs to be verified).


In practical applications, the matching of the protective film with specific materials and process parameters needs to be verified through small tests to balance cost and performance. For example, automotive interior parts may give priority to high temperature resistance and scratch resistance, while optical lenses focus on high transmittance and no residue.

英文