Suzhou Jidong New Material Technology Co., Ltd
Service Hotline:
0086 139 229 345 98
E-mail:13922934598@139.com
Online customer service
 Work Time
Mon to Fri :8:00-20:00
Sat to Sun :9:00-17:00
 Contact Details
手机:0086 139 229 345 98
邮箱:409639645@qq.com

"Research on the Application of 80 Micron Transparent Frosted CPP Protective Film in Plastic Hot Pre

  73
Author:Jidong New Materials

1. Introduction

In the field of modern plastic product processing, hot pressing is a widely used process technology. This process forms plastic materials by heating and pressurizing. However, during the molding process, the surface of plastic products is easily affected by factors such as high temperature and mechanical friction, resulting in quality problems such as scratches and burns. Therefore, it is very important to choose a suitable surface protection material. The 80-micron thick transparent frosted CPP protective film has become an ideal surface protection choice due to its unique physical and chemical properties. This article will study its application effect in plastic hot pressing molding in depth.


热压保护膜-1.jpg

2. Material properties of CPP protective film



1. Material composition and structure

CPP protective film is mainly made of cast polypropylene (CPP). Polypropylene is a high-performance polymer material with advantages such as low density, strong chemical corrosion resistance, and stable mechanical properties. The CPP film processed by the casting process has uniform molecular arrangement and good crystallinity in the microstructure, which lays the foundation for its excellent performance.



(II) Thickness and temperature resistance

The object of this study is a CPP protective film with a thickness of 80 microns. Although it is relatively thin, it has excellent heat resistance after special processing and can withstand high temperature environments up to 150 degrees. This is mainly due to the thermal stability of the polypropylene material itself and the heat-resistant additives added during the production process. Under high temperature conditions, the molecular structure of the protective film can remain stable without obvious thermal decomposition or deformation, thereby effectively protecting the covered plastic products from high temperature damage.



3. Color and surface effects

The CPP protective film is transparent and frosted. The transparent property allows the surface condition of the protected object to be clearly observed during the production process, making it easy to find potential problems and deal with them in a timely manner. The frosted effect gives the protective film a unique surface texture. On the one hand, it can reduce light reflection and make observation more comfortable; on the other hand, the frosted surface has a certain microscopic roughness, which can enhance the adhesion between the protective film and the plastic product, and at the same time will not cause scratches on the surface of the product when it is torn off.



3. Performance advantages of CPP protective film



1. Good adhesion


1. Principle of good fit

The surface of CPP protective film has been specially treated and has moderate surface energy. When it is attached to the surface of plastic products, it can fit closely with the surface of the product to form a good contact interface. This fit is mainly due to the flexibility and surface activity of the protective film. The flexibility enables the protective film to adapt to the surface of plastic products with different shapes and curvatures, while the surface activity promotes the intermolecular force between the protective film and the product, thereby achieving fast and smooth fitting.


2. Experimental Verification

In the experiment, plastic products of different shapes and materials were selected, such as flat plastic sheets and curved plastic shells, and 80 micron CPP protective films were attached to their surfaces. The results showed that the protective film could be quickly attached in a short time without obvious bubbles or wrinkles. Even on some products with complex shapes, such as plastic parts with grooves or protrusions, the protective film could be well attached, with a coverage rate of more than 99%, which fully proved its good adhesion.



(ii) Tearability


1. Tearability principle

The tearability of CPP protective film mainly comes from the reasonable design of its molecular structure and thickness. The polypropylene molecular chain has a certain mobility inside the protective film. When subjected to external force, the molecular chains can slide relative to each other, so that the protective film will not produce too much resistance during the tearing process. At the same time, the thickness of 80 microns ensures the strength of the protective film without making it too thick and difficult to tear off. In addition, the edge of the protective film has been specially treated to have a certain tearing starting point, which further facilitates the tearing operation.


2. Actual application effect

In actual production, operators can easily tear off the CPP protective film from the surface of plastic products. During the tearing process, the protective film will not strongly adhere to the surface of the product, and will not cause pulling or damage to the surface of the product. In addition, the tearing speed is fast, and about 10 medium-sized protective films can be torn off per minute on average, greatly improving production efficiency. Compared with some traditional protective films, the CPP protective film has obvious advantages in easy tearing, reducing time waste and product quality problems caused by difficult film tearing.



(III) No residual adhesive


1. No residual glue principle

The non-residue adhesive property of CPP protective film is achieved by optimizing the adhesive formula and production process. In the production process of the protective film, a special low-residue adhesive is used. This adhesive can quickly break the adhesive molecular chain when the protective film is torn off while ensuring that the protective film has moderate adhesion to the surface of the plastic product, so that the proportion of adhesive residue on the protective film is much greater than the proportion on the surface of the plastic product. In addition, the surface treatment process of the protective film also plays a key role. It can effectively reduce the intermolecular force between the protective film and the surface of the plastic product, further reducing the possibility of residual adhesive.


2. Experiment and application verification

In the experimental test, 80 micron CPP protective film was attached to the surface of various plastic products, and then removed after being subjected to harsh environments such as high temperature and high humidity. The surface of the plastic products after removal was tested using a high-precision residual adhesive detection instrument, and the results showed that the amount of residual adhesive was extremely low, with an average residual adhesive amount of no more than 0.1 grams per square meter. In actual production applications, customers reported that after using the CPP protective film, there was almost no residual adhesive on the surface of plastic products, and no additional cleaning treatment was required, which greatly reduced production costs and product defect rates.



4. Application of CPP protective film in plastic hot pressing molding



1. Application Process


1. Preparation before film application

Before the plastic products are hot-pressed, the surface of the products must be cleaned to remove dust, oil and other impurities on the surface to ensure that the surface is clean and dry. Then, according to the shape and size of the products, cut the appropriate size of 80 micron transparent frosted CPP protective film.


2. Film application

Lay the cut protective film flat on the surface of the plastic product, and slowly attach it from one end. At the same time, use a soft tool (such as a rubber scraper) to gently scrape it flat and remove bubbles so that the protective film fits tightly to the surface of the product. During the film application process, be careful to avoid wrinkles and bubbles to ensure the flatness of the protective film.


3. Hot Press Forming

After the film is applied, the plastic product is sent to the hot pressing equipment. During the hot pressing process, the CPP protective film can withstand a high temperature of 150 degrees, while protecting the surface of the product from the direct effects of high temperature and mechanical pressure. The protective film remains stable in a high temperature environment and will not melt, deform or chemically react with the surface of the product.


4. Film removal and subsequent processing

After the hot pressing is completed, the plastic product can be removed after cooling to room temperature. Due to the easy tearing and non-residue properties of the CPP protective film, the removal process is simple and quick, and will not cause damage to the surface of the product or residual adhesive. After removing the protective film, the surface of the plastic product is as smooth as new and can be directly packaged or used in the subsequent stages.



(II) Application advantages


1. Improve product quality

During the hot pressing process, the 80-micron transparent frosted CPP protective film can effectively prevent the surface of plastic products from being burned by high temperature, mechanical scratches and other problems. Due to the transparency of the protective film, operators can observe the molding conditions of the product surface in real time, and promptly discover and deal with possible defects. At the same time, the non-residue adhesive property of the protective film ensures that the surface of the product does not require additional cleaning after the film is removed, avoiding secondary contamination caused by improper cleaning, thereby significantly improving the appearance quality and overall quality of the product.


2. Improve production efficiency

The good adhesion and tearability of CPP protective film greatly shortens the time of film application and tearing. In large-scale production, time is efficiency. The fast film application and tearing operation reduces the downtime in the production process and improves the overall operation efficiency of the production line. In addition, since the protective film can effectively protect the surface of the product, it reduces the scrap rate caused by surface quality problems, further improving production efficiency and economic benefits.


3. Reduce production costs

Although the 80 micron transparent frosted CPP protective film itself has a certain cost, from the perspective of the overall production process, it can significantly reduce production costs. On the one hand, the use of protective film reduces rework and scrap caused by surface quality problems, reduces raw material waste and labor costs; on the other hand, due to the easy tearing and non-residue properties of the protective film, the cleaning process and the use of cleaning materials are reduced, further reducing production costs. In the long run, the use of this CPP protective film can bring considerable cost savings to the company.



V. Conclusion and Outlook

The 80-micron-thick transparent frosted CPP protective film has great application potential in the field of hot pressing of plastic products due to its excellent properties such as high temperature resistance of up to 150 degrees, good adhesion, easy tearing, and no residual adhesive. Through experimental research and practical application verification, the protective film can effectively protect the surface of plastic products, improve product quality, increase production efficiency, and reduce production costs. However, with the continuous development of plastic product processing technology and the increasing diversification of market demand, the adaptability requirements for protective films are getting higher and higher, forcing protective film manufacturers to accelerate the development of new products to meet market demand.

成功实现_罗马尼亚语.jpg