|
Work Time Mon to Fri :8:00-20:00 Sat to Sun :9:00-17:00 Contact Details 手机:0086 139 229 345 98 邮箱:409639645@qq.com |
The core secrets of printed surface protection: Why must these key indicators be considered for PET film protection?
39
In the printing and manufacturing industry, PET film, with its excellent flatness and weather resistance, has become the preferred medium for high-end printing. From delicate electronic product labels and brand logos to vibrant packaging posters and brochure covers, everything relies on its support. However, few people realize that the surface of the PET film after printing is actually the most "fragile" part—the freshly printed ink layer is not yet fully stabilized and is easily scratched and stained with fingerprints. Friction during transportation and stacking, as well as stretching during processing, can damage the integrity of the pattern. At the same time, if not properly protected, problems such as ink fading and residual adhesive pollution may occur, directly lowering product quality and brand reputation.
This necessitates that the matching surface protective film precisely match the protection requirements, with each parameter directly addressing the core pain points of printed surface protection. The GC920, as a protective solution specifically tailored for PET film printed surfaces, has parameters set with remarkable precision, reflecting a deep adaptation to the protection needs of the printing industry. Starting with the basic protection requirements, the core demand for printed surfaces is "intact preservation," which places clear demands on the thickness and appearance of the protective film. The GC920 employs a precise 40-micron thickness, avoiding the insufficient protection resulting from excessive thinness—failing to withstand minor impacts and scratches during transportation—while also eliminating the cost waste and uneven adhesion issues associated with excessive thickness. More importantly, its transparent frosted appearance, combined with a 42.48% haze and 84% transmittance, creates an excellent effect of "soft and non-reflective, clear and not blurry": the frosted texture effectively avoids fingerprint residue and light reflection, allowing the printed pattern to be clearly displayed in different lighting conditions, especially suitable for printed materials that need to be displayed for a long time; while the high 84% transmittance ensures that the protective film will not obscure the ink color, allowing the color saturation and detail texture of the pattern to be perfectly reproduced, while the 42.48% haze gives the printed material a more advanced matte texture, enhancing the product's visual quality. Now let's look at the key indicator of adhesion and peeling—the 150-350g adhesion strength. This is the core parameter for balancing "solid protection" and "no residue." The ink layer on the printed surface itself has certain special characteristics. Excessive adhesion will take away ink during peeling, causing damage to the pattern; insufficient adhesion will not allow for a tight bond, making it easy to peel off and allow dust to enter during transportation or processing, resulting in secondary pollution. GC920's adhesion precisely covers the 150-350g range, firmly adhering to the printed surface of PET film, resisting damage from stacking friction and minor collisions, while easily peeling off during subsequent processing or use, achieving "no residue" and eliminating additional cleaning steps, significantly improving production efficiency. This adaptability perfectly meets the needs of both mass-produced packaging materials and precision electronic label printing. For PET printed products requiring subsequent processing, the elongation rate of the protective film is an indispensable key indicator. In post-processing stages such as die-cutting, bending, and deep drawing, ordinary protective films often crack due to insufficient elongation, causing the printed surface to be directly exposed to the processing environment, resulting in scratches, indentations, and other defects. GC920, with its ultra-high elongation rate of 550% in the MD direction and 650% in the TD direction, achieves the advantage of "following deformation without cracking"—no matter how the PET film is stretched or bent during processing, the protective film adheres tightly to the surface, protecting the printed surface from damage throughout the entire process. This omnidirectional high elongation makes the post-processing of printed materials smoother, effectively reducing the scrap rate caused by protective failure and saving production costs for enterprises. In fact, the protection needs of the printed surface of PET film are essentially a pursuit of "precise protection"—it must have sufficient physical protection to resist external damage, avoid the protection itself from affecting the print quality, and adapt to the complex scenarios of subsequent processing. Every parameter of GC920 is a precise response to these needs: 40-micron thickness provides solid basic protection, transparent frosted texture enhances the visual experience, precise adhesion balances bonding and peeling, and ultra-high elongation adapts to processing scenarios, comprehensively protecting the quality integrity of the printed surface of PET film. Choosing a suitable protective film for the printed surface of PET film is never a simple matter of "covering and protecting," but rather choosing a quality assurance solution that matches the entire production process. With its precise parameter design and comprehensive protective performance, GC920 has become the preferred choice for PET film protection in the printing industry, ensuring that every printed product remains in top condition from production to delivery.
|