Suzhou Jidong New Material Technology Co., Ltd
Service Hotline:
0086 139 229 345 98
E-mail:13922934598@139.com
Online customer service
 Work Time
Mon to Fri :8:00-20:00
Sat to Sun :9:00-17:00
 Contact Details
手机:0086 139 229 345 98
邮箱:409639645@qq.com

Comparative Analysis of Quantitative Standards for Process Parameters of CPP and PE Protective Films

  70
Author:积东新材

In the field of industrial protection and packaging, CPP (cast polypropylene) protective film and PE (polyethylene) protective film have significantly different quantitative standards for their process parameters (thickness, viscosity, transparency) due to differences in material properties. These standards not only determine the performance boundaries of the materials but also directly affect the choice of their application scenarios. The following is a quantitative comparative analysis of the process parameters of the two films, combining national standards, industry specifications, and corporate practices.


I. Thickness: Differences in Range and Precision


Thickness is a fundamental process parameter for protective films, directly affecting their flexibility, puncture resistance, and adhesion. The thickness range and precision requirements for both are as follows:


1. CPP Protective Film


- General Applications: Thickness is typically between 25~50μm, such as CPP films used in food packaging and daily necessities packaging. This thickness balances transparency and stiffness.


- Special Applications:


- Retort-grade CPP (resistant to 121℃ high-temperature sterilization): Thickness needs to reach 60~80μm to enhance thermal stability and tear resistance;


- Electro-optical Applications (e.g., diffuser sheet protection): Thickness can be customized to 40~100μm, with a precision requirement of ±2μm to meet precision lamination needs.


2. PE Protective Film


- General Purpose: Wider thickness range, from 30μm (ultra-thin) to 400μm (extra-high adhesion).


- Classification by Adhesion:


- Low-tack/Micro-tack Protective Film (Suitable for Precision Electronics): Thickness is mostly 30~50μm, accuracy ±5μm;


- Medium-tack/High-tack Protective Film (Suitable for Building Materials, Metals): Thickness is usually between 50~200μm, some rough-surface protective films can reach 400μm.


Summary


CPP film has a more concentrated thickness range (25~100μm) and higher accuracy requirements (±2μm); PE film has a wider thickness range (30~400μm), better suited for rough protection needs.


II. Viscosity: Classification Standards Matching Applications


Viscosity is a core performance parameter of protective films, determining their adhesion strength to the protected surface. Both are classified by peel strength (unit: g/25mm or N/25mm), but the specific values differ significantly.


1. CPP Protective Film


- General Purpose: Peel strength is typically between 100~1000g/25mm. For example, CPP film for electronic optics (diffuser protection) has a peel strength of 100~1000g/25mm, suitable for bonding precision components.


- Special Applications:


- High-Temperature Retort Grade CPP: Peel strength must be ≥500g/25mm to ensure it does not peel off during high-temperature sterilization.


- Food Packaging CPP: Peel strength is between 200~800g/25mm, balancing easy tearing and sealing.


2. PE Protective Film


- Graded by Adhesion (Industry Standard):


Adhesion Grade Peel Strength (g/25mm) Applicable Scenarios


Slightly Tacky ≤5 Organic boards, instruments, displays


Low Tack 10~20 Steel mirror panels, titanium metal, glossy plastic sheets


Low-Medium Tack 30~50 Furniture polycarbonate panels, stainless steel sheets, ceramic tiles


Medium Tack 60~100 Automotive paint, decorative glass, wood products


High Tack 100~180 Aluminum composite panels, glossy aluminum profiles, rough plastics


Extra High Tack 180~400 Doors and windows, curtain walls, rough-textured frosted aluminum, explosion-proof glass


- Note: The viscosity of PE film is greatly affected by the adhesive system (such as acrylate, rubber). Acrylic adhesives have better weather resistance than rubber adhesives and are suitable for outdoor applications.


Summary


CPP film has a narrower viscosity range (100~1000g/25mm), making it more suitable for precision electronics and food packaging; PE film has a finer viscosity gradation (≤5~400g/25mm), covering the needs of all scenarios from precision components to rough-surface building materials.


III. Transparency: A Quantitative Standard of Optical Performance


Transparency is a key appearance parameter of protective film, directly affecting the visual effect of the protected product. The transparency standards for both are mainly measured by light transmittance (%) and haze (%).


1. CPP Protective Film


- General Purpose: Light transmittance ≥90%, haze ≤8%, close to the optical level of PET film, suitable for food packaging, gift bags, and other scenarios where the contents need to be displayed.


- Electro-optical: Light transmittance ≥92%, haze ≤5%. If CPP film is used for diffusers, it is necessary to ensure uniform light transmission without affecting the display effect.


2. PE Protective Film


- General Purpose: Light transmittance between 60% and 90%, haze ≤10%. Suitable for general packaging PE film; transparency is sufficient for basic requirements.


- High Transparency: Light transmittance ≥85%, haze ≤5%. Suitable for electronic display screen protection PE film, ensuring screen clarity.


Summary


CPP film has better transparency than PE film (5-10% higher light transmittance, 3-5% lower haze), making it more suitable for applications requiring high optical performance (such as electronic displays and food packaging). While PE film has slightly lower transparency, it is sufficient for general industrial protection needs.


IV. Industry Standards and Certifications


In addition to the above quantitative parameters, industry standards for both also specify requirements for their process parameters:


- CPP Film: Must comply with GB/T 27740-2011 "Cast Polypropylene (CPP) Film" national standard, requiring tensile strength ≥15MPa (longitudinal), elongation at break ≥200% (longitudinal), and hygiene indicators meeting food contact material requirements.


- PE film: Must comply with GB/T 4456-2008 "Polyethylene Blown Film for Packaging" national standard, requiring tensile strength ≥10MPa (longitudinal), elongation at break ≥200% (longitudinal), and viscosity specifications conforming to HG/T 2710-2008 "Test Method for Peel Strength of Plastic Films and Sheets".


V. Conclusion: Matching Process Parameters with Application Scenarios


Parameters: CPP Protective Film, PE Protective Film


Thickness: 25~100μm (accuracy ±2μm) 30~400μm (accuracy ±5~10μm)


Viscosity: 100~1000g/25mm (precision electronics/food packaging) ≤5~400g/25mm (full-scene coverage)


Transparency: Light transmittance ≥90%, haze ≤8% (high optical performance) Light transmittance 60~90%, haze ≤10% (general optical performance)


Application Recommendations:


- CPP film: Prioritize products with a thickness of 25~50μm, viscosity of 100~500g/25mm, and light transmittance ≥90%. Suitable for electronic optical devices (e.g., diffusers, light guides), food packaging (e.g., meat, candy), precision instruments (e.g., sensors, displays), etc.


PE film: Select viscosity according to the scenario. Slightly viscous/low viscous (≤20g/25mm) is used for precision electronics (such as mobile phone screens, circuit boards), and medium/high viscous (60~400g/25mm) is used for rough protection scenarios such as building materials (such as aluminum composite panels, ceramic tiles) and metals (such as stainless steel plates, titanium metal).

20251213