Suzhou Jidong New Material Technology Co., Ltd
Service Hotline:
0086 139 229 345 98
E-mail:13922934598@139.com
Online customer service
 Work Time
Mon to Fri :8:00-20:00
Sat to Sun :9:00-17:00
 Contact Details
手机:0086 139 229 345 98
邮箱:409639645@qq.com

Type, Application and Production Process Characteristics of CPP Film

  68
Author:研发学堂Source:Wechat official account

CPP film is a polypropylene (PP) film produced by a casting extrusion process.

This kind of film is different from BOPP film. It is a non-oriented film. It has the characteristics of good transparency, high gloss, good stiffness, good moisture resistance, excellent heat resistance and easy heat sealing. After printing, compounding and bag making, it is widely used in food, medicine, household paper, clothing, daily necessities, industry and other packaging.

The CPP film has the characteristics of good transparency, high glossiness, good stiffness, good moisture resistance, excellent heat resistance, easy heat sealing and the like, and can be divided into a general CPP film, an aluminized CPP film, a cooking CPP film, a CPP protective film and the like according to different uses. CPP films are printed and bagged for a wide range of applications including garment, knitwear and floral packaging bags, document and photo album films, food packaging and metallized films for barrier packaging and decoration.

In addition, the demand for food packaging, candy packaging (twist film), drug packaging (infusion bags), self-adhesive tape, business card folders, ring folders and other aspects is increasing.

CPP has excellent heat resistance. As that soften point of PP is about 140 deg C, the film can be applied to the field of hot filling, retort bags, aseptic packaging and the like. In addition, it has excellent acid resistance, alkali resistance and grease resistance, making it the preferred material in the field of bread packaging or laminating materials. It has safe contact with food, excellent demonstration performance, will not affect the flavor of the food inside, and can choose different grades of resin to obtain the desired characteristics.


01-CPP film production process

The CPP film is an unstretched polypropylene film made by a casting process. At present, after decades of accumulation, China's CPP film has made considerable progress. Compared with developed countries, China's CPP film has reached the international advanced level in terms of production process and production equipment.

The casting film production process generally adopts a T-shaped die head method, and the manufacturing method is characterized in that:

(1) the casting method omits the film blowing stage of the tube film method, is easy to start and has less waste;   

(2) during the tape casting production, the chemical molecules are arranged in order, so that the transparency, the gloss and the thickness uniformity of the film are improved, and the film is suitable for high-grade packaging;   

(3) the casting part adopts an electric structure of swinging up and down and moving back and forth, and the operation is simple and convenient;   

(4) The corona part is air-cooled and water-cooled, so the product is not easy to deform.    The extruder firstly melts the raw material resin, and the molten resin is cast on a cooling roller with a smooth surface through a die head to be rapidly cooled into a film. After thickness measurement, traction, corona treatment and flattening, the edge material with thicker edge is cut off, unfolded again and rolled into a film roll.   


02 Key points of CPP casting film production process

The T-die is one of the key equipment in production. The design of the die should make the material flow out evenly along the whole width of the lip of the die, there should be no dead angle in the internal flow channel of the die, and the temperature of the material die should be uniform. Many factors including the rheological behavior of the material should be considered. To use a precision machining head, a tapered manifold hanger head is commonly used. The surface of the cooling roll shall be finished, the surface roughness shall not be greater than 0.15 mm, the rotating speed shall be stable, and the dynamic balance shall be good, so as to avoid longitudinal thickness fluctuation. The film thickness shall be monitored with a beta or infrared thickness gauge to achieve a satisfactory thickness tolerance. In order to produce qualified cast film, it is necessary not only to adjust the process on raw materials, but also to master the processing conditions.

The most important factor affecting the properties of the films is temperature. With the increase of resin temperature, the longitudinal (MD) tensile strength and transparency of the film increased, and the haze decreased gradually, but the transverse (TD) tensile strength of the film decreased. The suitable temperature is 230 ~ 250 ℃. The air knife on that cool roller make the film and the surface of the cooling roller form a thin air layer, so that the film is evenly cool, thereby maintaining high-speed production. The air knife must be adjusted properly. Excessive air volume or improper angle may make the film thickness unstable or not stick to the roller, resulting in wrinkles or patterns affecting the appearance quality. The stiffness and haze of the film increased with the increase of the temperature of the cooling roller.

If there are additives inside the raw materials on the surface of the cooling roller, the machine must be stopped for cleaning, so as not to affect the appearance quality of the film. The cast film is relatively soft, so the pressure and tension must be adjusted according to the thickness of the film, production speed and other factors when winding. Otherwise, ripple will be generated, which will affect the flatness. The selection of tension depends on the tensile strength of the product. Generally, the greater the winding tension is, the product after winding is not easy to appear the phenomenon of winding roll relaxation and deviation, but it is easy to appear ripple at the beginning of winding, which affects the flatness of the roll. On the contrary, if the coiling tension is small, the initial effect is good, but the more the coiling, the easier the film relaxation and deviation will occur. Therefore, the tension should be moderate and controlled to be constant.


03-Process characteristics of multilayer co-extruded cast film    In order to improve the performance of the film, reduce the cost, and meet the requirements of users for various uses and high performance, the development of multilayer composite film is very fast, especially in developed countries where the living standard is relatively high, environmental protection is emphasized, and the shelf life and quality of food are required to be extended. Multilayer copolymerized casting film is also one of the multilayer films, which has changed the problems and disadvantages of single performance of CPP film products and can not meet the various requirements of the market.

1、 General Purpose:

The multilayer copolymerized casting film can be designed according to different purposes, such as bread packaging, clothing (especially underwear and trousers) packaging, fruit packaging and the like on an automatic packaging machine, or can be compounded with a printed BOPP film to form a BOPP/CPP two-layer film, and can be used for packaging clothing and dry food (such as a fast food noodle bag, a bowl cover and the like). The generic structure is copolymerized PP/homopolymerized PP/copolymerized PP or homopolymerized.

2. Metallization type:

The surface of the product is required to have extremely strong adhesion strength to the evaporation metal (such as aluminum), and can still maintain good dimensional stability and rigidity after evaporation; the other surface has lower heat sealing temperature and higher heat sealing strength, and the structure of the metallized type is also copolymerized PP/homopolymerized PP/copolymerized PP.

3、 cooking type:    

The two-layer copolymerized CPP used for cooking can withstand cooking sterilization at 120 ℃ and 15 MPa pressure. It not only keeps the shape and flavor of the internal food, but also the film will not crack, peel or bond, and has excellent dimensional stability. It is often compounded with nylon film or polyester film to package soup food, meatballs, dumplings and other food or frozen food before eating. The structure of the cooking three-layer PP film is copolymerized PP/copolymerized PP/copolymerized PP.


4. High temperature cooking type:

Three-layer copolymer CPP film sterilized at 121 ~ 135 ℃ is required for packaging roast chicken, roast bone, jam and beverage, among which copolymer PP requires better performance than general cooking copolymer PP. In addition to the three-layer film, there is also a cast barrier five-layer packaging, whose structure is: PP/adhesive/PA/adhesive/copolymer PE; PP/adhesive/PA/adhesive/EVA; PP/adhesive/EVOH/adhesive/PE; PP/adhesive/EVOH/adhesive/EVA; PP/Adhesive/EVOH/Adhesive/PP.

04-Analysis of CPP Film Structure and Raw Material Usage

The structure of CPP casting film is similar to that of other types of packaging films. At present, the production of CPP casting film in domestic factories is mainly three-layer co-extrusion casting film, and the production of five-layer structure is less. The three-layer structure is respectively a heat-sealing layer, a support layer and a corona layer. Of course, the raw materials required in the production process of the three-layer structure of the cooking film, the aluminized film and the ordinary composite film are definitely different. This article makes a brief summary and analysis:    The main upstream raw material of CPP is PP, but the raw materials used in different films are different. PP homopolymer, binary copolymer and ternary copolymer are used together in film production and cooperate with each other.    The heat-sealing layer is required to be subjected to heat-sealing processing, so that the material is required to be low in melting point, good in hot melting property, wide in heat-sealing temperature and easy to seal; the supporting layer plays a role in supporting the film, so that the stiffness of the film is increased, and the cost is reduced; The corona layer should be printed or metallized, which requires moderate surface tension, and the addition of additives in the resin should be strictly limited. For example, the corona layer of aluminized substrate requires that the surface of the product should have strong adhesion strength to metals such as aluminum, and can still maintain good dimensional stability and rigidity after evaporation, so special aluminized corona materials should be used for production.   


Main downstream applications of CPP film (see the table below)

图片